|What I like to listen:||Rap|
|I like:||In my spare time I love surfing the net|
Name of Standard. This Standard commences on the day after it is registered.
There is no mandatory application date for all other model vehicles. For the purposes of clauses 3. Applicability Table. Vehicle Category. ADR Category Code. Manufactured on or After. Acceptable Prior Rules. Moped 2 wheels. Moped 3 wheels. Motor cycle. Motor cycle and sidecar.
Motor tricycle. Passenger car. Forward-control passenger vehicle.
Off-road passenger vehicle. Light omnibus. Heavy omnibus.
Light goods vehicle. Medium goods vehicle.
Heavy goods vehicle. Very light trailer. Light trailer.
Medium trailer. Heavy trailer. For vehicledefinitions and meanings used in this standard, refer to:.
Definitions in paragraph 2 of the standards specified in clauses This shall be in the centre rear seating position, if applicable; and. Notwithstanding clauses 5. For guidance to vehicle manufacturers the clearance parameters shown in Figure 7 are sufficient to demonstrate compliance with clause 5. For category MD2 and NA vehicles:. If fitted, these anchorages must comply with the relevant clauses of this rule for the particular vehicle category. For all vehicle :. The information shall include:.
Under no circumstances are they to be used for adult seatbelts, harnesses, or for attaching other items or equipment to the vehicle. Orientation shall be shown relative to the front of the vehicle.
Details of the dedicated anchor fitting package in accordance with clauses 5. Except as provided in clause 8. The requirements of clause 8. Subject to clause 8. For category NA vehicles only:. For guidance to vehicle manufacturers, the clearance parameters shown in Figure 8 are sufficient to demonstrate compliance with clause 9.
The static test load of 3.
The test dummies shall each have a mass of not less than The test rig shall have a mass of not less than kg and cars rule 34 meet the requirements of clause The test dummies shall be restrained in accordance with the requirements of clause Twenty times the weight of the entire seat must be simultaneously imposed with a load of at least 3.
A flexible connection passing over the top of the seat back must be used to simultaneously apply the required load at least 3. Dynamic testing must be as specified in Appendix A, paragraph 6. Static testing must be as specified by Society of Automotive Engineers Jb Motor Vehicle Seating Systems, Julybut using the values specified in and the procedures applicable to this standard. Distributed lo may be replaced by concentrated lo at the loading centroid.
The tests in this clause For all vehicles, except for convertible vehicles  and category NA vehicles:. For convertible vehicles 1 and category NA vehicles:. For the purposes of this standard:. Where a vehicle manufacturer elects to incorporate a specific vehicle child restraint in a vehicle, it must comply with the relevant general and particular technical specifications of the United Nations Regulation No. The technical requirements of the United Nations Regulation No. Dimensions in millimetres. Dimensions in mm not to scale.
Dimensions in millimetres not to scale. Each view can be rotated about an axis passing through point X and perpendicular to the. Dimensions in mm except where otherwise indicated. Drawing not to scale. If not adjustablethe side view may be rotated about an axis passing through Point Y and perpendicular to the. The Table of Amendments provides a history of clauses that have been amended, inserted or deleted.
Cars disney porn captions disney pixar cars porn comics cars disney cartoon porn beach
This vehicle standard is determined under section 7 of the Motor Vehicle Standards Act This takes the format of old no. Construction of Vehicles R. Skip to primary Skip to primary content. FC Table of contents.
Name of Standard 1. Commencement 1. For vehicledefinitions and meanings used in this standard, refer to: 4. This shall be in the centre rear seating position, if applicable; and 5. For category MD2 and NA vehicles: 5.
Federal register of legislation - australian government
For all vehicle : 7. The information shall include: 7. For all vehicle : 8. For category NA vehicles only: 8. For all vehicle : 9. For all vehicle : For all vehicles, except for convertible vehicles  and category NA vehicles: For convertible vehicles 1 and category NA vehicles: For the purposes of this standard: Amendment 1 Start Date.